Shoot Hypochlorous acid generator manufacturer

As an efficient and safe disinfectant. Hypochlorous acid is being accepted by more and more families. Medical institutions and public places. A qualified hypochlorous acid generator. From research and development to delivery to the user’s hands. To experience the production. Quality inspection, packaging. Delivery of four key links. Today, we walk into a factory to see how a device is born.

The production principle of hypochlorous acid generator is through strict screening. The factory uses industrial grade titanium platinum electrode and corrosion resistant electrolytic film. These core materials directly determine the electrolytic efficiency and product purity. On the production line, workers perform electrode assembly. Cell sealing, circuit board installation and pipe connection according to the standard operating instructions (SOP). The torque of each screw and the air tightness of each waterway must be pre-checked. After the assembly is completed. The equipment will enter the energized initial adjustment stage. Through the simulation of the actual electrolysis process. To confirm whether the current, voltage, flow and other parameters are within the set range. The whole production process emphasizes “closed-loop management”. that is, assembly, debugging and recording are completed synchronously to ensure traceability of each equipment

In the manufacture of hypochlorous acid generator. Quality inspection is not the last pass. But the core process interspersed in the production process. The factory has set up two barriers: online inspection and finished product inspection.

The online detection mainly monitors the concentration of available chlorine, pH value, oxidation reduction potential (ORP) and other key indicators in the electrolysis process, and the system will record and generate a curve graph in real time. If the available chlorine concentration of a device deviates from a target value (e.g. 50±5 mg/L), the system automatically alarms and locks the device and does not allow it to proceed to the next process.

Finished product testing is even more stringent. Each assemble device must be continuously operate for more than 30 minutes to test its stability under different water quality (normal temperature water, low temperature water, hard water). Electrolytic residues are also test to ensure that the hypochlorous acid solution does not contain harmful by-products such as chlorates. In addition, the electrical safety test includes voltage test, leakage current test and ground continuity test to ensure that the equipment can be use safely in wet environment. Equipment is label as qualified only if all indicators meet corporate standards, which are usually stricter than national industry standards.

Hypochlorous acid generators that pass quality inspection will then enter a dedicated packaging line. Considering that the equipment contains precision components such as circuit boards and pumps, the packaging must balance protection with user experience.

The factory uses customized EPE pearl cotton lining, according to the shape of the equipment to open mold, to ensure that the equipment in the carton without shaking space. All pipe interfaces are equip with dust stopper to prevent impurities from entering during transportation; Use tie to fix the power cord to avoid rubbing. For products with electrolytes or activators, there will be a separate compartment in the package and a leak-proof zipper bag.

The packaging will have clear markings, including shipping signs such as “This Side Up,” “Keep Dry,” and “Fragile,” and will also include a quick installation guide and a certificate of conformity. Some export models will also have multilingual warning labels to prevent user misoperation.

From the precise assembly of electrodes to the unit-by-unit testing of water quality parameters; from the meticulous design of shockproof packaging to full traceability after shipment—the journey of a hypochlorous acid generator out of the factory is, in fact, an external manifestation of the factory’s quality culture. Disinfection is no small matter, and neither is equipment. Only by ensuring that every step is verifiable and traceable can users truly feel at ease when using it.